Horizontal Autoclave

Rew Horizontal Fully Automatic Autoclave

Automatic Purging for Moisture Removal

Automatic Steam Transfer

Automatic Steam Release

Soak Timer 

Gasket                               Made of Joint less Silicon 

Display                              Digital

Exhaust of Pressure          Manual through a Exhaust Valve

Sterilizing Pressure           1.2 to 1.5 kgf.  (15 to 35)PSI      

Operating Pressure           15 to 35 PSI

Pressure Gouge                 0-4 kgf/cm (50 Psi)

MOC Chamber                 3.5mm 304 Grade

MOC Jacket                       2.5mm 304 Grade

MOC Boiler                       3mm 304 Grade

MOC Door Lid                   12mm 304 Grade

Power Supply                      440 Volts 3 Phase Supply

Features

REW Horizontal Triple Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.

All ideal tool for Laboratories, hospitals, nursing home, R&D labs, etc.

The inner chamber, steam jacket, outer chamber, and boiler are made of heavy gauge stainless steel with leak-proof argon arc welding.

Lid is made of thick machined Mild Steel plate lined with stainless steel from inside

The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.

Hydraulically tested to withstand 2.5 times the working pressure.

Steam boiler is fitted with water level indicator, pressure gauge, low water cut-off device, and automatic pressure control device.

Fitted with safety valve as a safety device.

Drain valve is fitted at the side bottom for easy draining/cleaning.

The unit is provided with a positive self-locking safety door which cannot be opened while the chamber is under pressure and disengages automatically when the chamber is exhausted.

This affords complete safety to the working personnel.

Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired.

The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.

An automatic vacuum breaker is fitted to all REW units as a standard accessory, in order to break vacuum in case of steam condensation.

The flange immersion-type heating element made from very high-grade material provides the fast formation of pressure in the system and are protected through an electric low water level cut-off device.

All REW Sterilizers are provided with triple safety features, through a PIEZOSTAT (Automatic Pressure Control System) and a spring-loaded safety valve fitted to the boiler/steam generator. The chamber is fitted with spring-loaded safety valve and a dead weight release valve.

Highly accurate temperature indicator is fitted for monitoring temperature.